| PART |
Description |
Maker |
| DS3992Z-18P_TR DS3992 DS3992Z-09N DS3992Z-09N_ DS3 |
Two-Channel, Push-Pull CCFL Controller FLUORESCENT LIGHT CONTROLLER, 80 kHz SWITCHING FREQ-MAX, PDSO16
|
Maxim Integrated Products, Inc.
MAXIM[Maxim Integrated Products]
|
| DS3687H DS3687J-8/A DS3687N-8/B DS3687H/A DS3687N- |
Dual Peripheral Driver
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.6V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.3V, Timeout: 20ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.0V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin 双外围驱动器
|
KEMET Corporation
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| LTC3721-1 LTC3721EGN-1 LTC3721EUF-1 LTC3721EGN-1PB |
Push-Pull PWM Controller; Package: SSOP; No of Pins: 16; Temperature Range: -40°C to 125°C SWITCHING CONTROLLER, 1000 kHz SWITCHING FREQ-MAX, PDSO16
|
Linear Technology, Corp.
Linear Integrated Systems
|
| DS1810R-15-U DS1810R-5-U |
5V EconoReset with Push-Pull Output
|
MAXIM - Dallas Semiconductor
|
| AG606 AG606-G AG606-PCB |
Push-Pull CATV Amplifier
|
Electronic Theatre Controls, Inc.
List of Unclassifed Manufacturers
|
| S8740280GT |
GaAs Push Pull Hybrid
|
PDI
|
| L293B03 |
PUSH-PULL FOUR CHANNEL DRIVERS
|
STMicroelectronics
|
| DRF130111 |
MOSFET Push-Pull Hybrid
|
Microsemi Corporation
|
| KR01-10J-12S KR01-10P-12S KR01-10J-12P KR01-10P-12 |
one touch push pull lock
|
Hirose Electric
|
| FP204 |
Push-Pull Circuit Applications
|
SANYO[Sanyo Semicon Device]
|
| DRF1301 |
MOSFET Push-Pull Hybrid
|
Microsemi Corporation
|
|
